|
|
||||||
|
||||||
|
Dees_Troy's Mini Midget Delrin Turtle
| Description | : | Body: Mini Midget Delrin Turtle - Black
Back Block: Turtle Innovations delrin sled Bolt: Turtle Innovations delrin bolt, 45 degree inlet Bolt Pin: Custom aluminum Pump Arm: Turtle Innovations titanium Ram: WGP MP4 (QEVs built-in) Front Block: CCM Feather Weight Front Block Screw: Twisted Products LPC Vertical Adapter: Shocktech (air hole drilled larger) LPR: WGP Tickler Frame: E2 with 1.20 Zero B board, sear and sear 'noid removed, Pulse RF chip where sear 'noid used to be, reflective eye, samurai trigger Valve: MQ IVG: Turtle delrin IVG Ball Detent: Kila V2 Feedneck: Q-lock (eBay) Regulator: CP shorty Rail: CP Micro Razor ASA: Empire Nano rail-mount ASA Hose: straight macroline fittings with macroline Barrel: Deadlywind carbon fiber Wisper with Freak inserts - 12 inch Hopper: Pulse in RF (green) mode Air Tank: Crossfire 45/45 It shoots great and weighs just under 2 pounds as you see it pictured including the 9V battery in the grip frame. The Pulse RF chip is wired to the cocking solenoid. The aluminum bolt pin is required to reach velocities over 260fps due to the cocking assembly being so light that the force of shooting the ball forward out the barrel pushes the cocking assembly backwards (equal and opposite reaction), reducing velocity. I tried everything including increased LPR pressure to solve it, but the extra 0.3 ounces of cocking weight solved the problem. The grip screws and the screws that hold the solenoid manifold together were replaced with nylon screws that were painted black. Black heatshrink tubing was used to cover the pump arm, macroline fittings, the barbs on the ram, and the bolt pin to achieve an almost all black appearance. |
|
||||||
|
|
RSS |