dragun fly

[calipimp]

ok im gonna convert my dragunfly into a halfblock. i was wondering wut the length of the slot on the hammer needs to be. and the bolt length as well

[OrryMan]

Well, first of all if you don't know or can't figure it out then i wouldn't recommend doing it yourself.  It requires alot of milling and if you plan to use a dremmel then have fun messing up your gun.  If you're using a mill then i apologize and i'm sure you can figure it out once you get the design laid out.  Also, it probably wont be compatable with most halfblock parts (or the mq valve? someone correct me if i'm wrong on that one).  But as i said unless you have a mill dont do it.

And seeing as this is your first post, welcome and read up on other info on this site if you want to know how to go about getting a halfblock.

[calipimp]

i looked at the other guns, how they work, and looked at all my parts and started on my gun. i found a way to get it to work w/o buying nething. the only thing i might have to get is a pump rod if i cant find a die. so yea. if u got ne pics of ur gun, plz show me ur back block and bolt pin. thx

[OrryMan]

Oh jeez... Go for it if you want but don't say I didn't warn ya.

[drg]

I agree. My standard rule is, if you have to ask, you probably shouldn't.