Can anyone do this for me?

[Bigpimpin55]

Is there anyone out there who can madify my cocker so that the ram is moved to the middle of the body near the midblock ppoint as to remove the pump arm completely from the gun.  Like the gun pictured in the link below:

http://www.halfcocker.com/modules.php?set_albumName=txtuning&id=prod_sledgehammer_bg&op=modload&name=gallery&file=index&include=view_photo.php

[Dees_Troy]

That's a sledgehammer mod done by TX-Tuning in Germany.  Their website is here:

http://tx-tuning.com/

I doubt they list the mod on their site anymore.  As I recall, the mod required the use a 2002 VF body only.  It might be possible to do it to other bodies that have almost no milling on them, but, since most, if not all stock bodies after 2002 have milling, those bodies would be much more difficult to find a spot to mount the ram without having the necessary screw holes either strip out or the screws stick too far in and interfere with the bolt or hammer.

[Snowman]

Yeah know, I was thinking about trying this soon..... I would like to try it on my own gun firs tho so if I mess it up Im not to upset. I think it may get alittle pricy tho(I'll keep it fair :wink: ) cause your going to need a new sled also if you wish to remove the pump arm enterly. Theres also turn around time to keep in mind.

[Bigpimpin55]

I'm planning on doing all the half/mid blocking before i get this mod done if I do it at all.  I just found out my friend is getting mill so idk

[Snowman]

Let us know how it turns out