New cocker guy need help

[bersly]

Just got a new orr signature series.

It is an e2 set up.

Now on to dumb questions

1. Do I need to cock the gun before airing up, if so how do I cock it, just try and pull the side cocking rod back until it catches?

2. Should I lube the front part of the cocking rod with some silicone grease that I have from an older smart parts gun

3. Should I put a few drops of gun oil in the gun and fire it a couple times.

Any and all other help is appreciated.

I Have always wanted a cocker and decided to give then another try. I bought the black magic when it came out and had to send it back for a refund after WGP failed to fix an air leak down the barrel three different times. Spent more time in the mail than on the field. I hope this works better, crossing my fingers

[drg]

1. Yes you should cock it, pull the pin back until it cocks.

2. Should not be necessary.

3. Oiling is generally discouraged with the Eblade solenoid.